Multi-layers Drier/fruit Mesh belt dryer

Working principle
The main principle of the mesh belt dryer is to evenly lay the materials on the mesh belt, dragged by the transmission device to move back and forth in the dryer, the hot air flows through the materials, and the water vapor is discharged from the moisture discharge hole. So as to achieve the purpose of drying. The mesh belt is made of 12-60 mesh steel mesh belt, and the length of the box is composed of standard sections. In order to save space, the dryer can be made into a multi-layer type. The common ones are two-room three-layer, two-room five-layer, length 6 -40m, effective width 0.6-3.0m.
, Mesh belt, transmission device, air inlet pipe, air outlet pipe, fan (hot air source is set separately), etc.
The organic head of the material is slowly dried by drying. The linear speed of the mesh belt depends on the type of material and the water content. The air flow direction adopts negative pressure and porous air intake to ensure the effective drying area and the air flow and wind speed are evenly distributed to improve the drying effect. In order to get the best drying effect and appropriate output, the moisture content of the material, the linear speed of the mesh belt, the air distribution volume and the wind temperature must be properly, reasonably and organically combined.

The advantages :

 1. The mesh belt has good gas permeability, and the product drying cycle can be adjusted arbitrarily.
2. The equipment runs smoothly and the materials are not easily damaged.
3. Large drying area and high strength.
4. Hot air circulation structure, uniform temperature and reduced energy consumption.
5. According to customer needs, it can be divided into several units, each unit can control the loop separately.
6. There are various heat source selections, such as electric heating, heat transfer oil heating, hot air heating, etc.